This is a versatile, high performance DVI extender with EDID management complete with transmitter and receiver; you just add the cables!

This unit has the capability to read the EDID (Extended Display Identification) information from the device connected to either DVI output or UTP output. This information can be stored in the UD2A-EDID-S memory as emulate learned, which allows the unit to emulate the actual monitor connected to the DVI input device. The UD2A-EDID-S has local DVI and remote UTP video and audio outputs. Its video outputs can be blanked or boosted when needed. This unit can drive video, audio, and RS-232 to 150 feet or more.

This unit can be controlled by either manually using the buttons on the front panel or remotely through a serial port with RS-232 commands or GUI software. The unit also has internal memory to store the last operating selection when power is off. The unit allows four different EDID selections to be routed, such as DVI Local, UTP Remote, Emulate Default, and Emulate Learned.

Resolution	CAT5E	CAT6
640x480	200 ft	300 ft
800x600	200 ft	300 ft
1024x768	200 ft	300 ft
1280x1024	150 ft	200 ft
1366x768	150 ft	200 ft
1600x1200	100 ft	150 ft
1920x1080	100 ft	150 ft
480p/576p	200 ft	300 ft
720p	200 ft	300 ft
1080i	200 ft	300 ft
1080p	100 ft	150 ft

• Video:
  DVI-D
• Audio:
  PC audio level
• Video Level:
  0 to 0.7V p-p
• Temperature:
  Operating: 32 to 122°F (0 to 50°C)
  Storage: –40 to +185°F (–40 to +85°C)
• Enclosure:
  Steel
• MTBF:
  90,000 hours (calculated estimate)
• Power:
  100-240V 50/60Hz 0.3A
• Size:
  Sender: 1.7" High x 11.25" Wide x 4.1" Deep
  Receiver: 1.25" High x 2.75" Wide x 3.0" Deep with 2 L-Shaped mounting ears that protrude 0.40" beyond the main box on the front and back
• Weight:
  3.00 pounds

UD2A-EDID Manual

UD2A-EDID Version 1.1 GUI
UD2A-EDID Version 1.2 GUI

UD2A-EDID Cad Drawing