Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
Two versions of the senders and receivers are available. One version comes with 2 “Dedicated” USB ports (DR1 & DR2), and a single DR1 version (same packaging).
Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs.
Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction.
Built-in EDID (Extended display ID), allows PC to detect LCD’s even if none is connected at the sender or the receiver.
Local USB outputs at the sender for connection of local keyboard and mouse.
4 general-purpose USB ports at the remote unit plus 1 “Dedicated” USB port
Supports hot-unplug and hot-plug of USB Peripherals (General Purpose USB ports, as well as DR1)
Description
The Hall Research Technologies Model U97-Ultra-2S Sender is part of the U97-Ultra-2 kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 400 feet away on any Category Cable (CAT5e/6 etc).
This product is a rack-mountable Sender Unit that connects to the Model U97-Ultra-2R wall-mountable Receiver. Both the Sender and Receiver can be purchased as a kit as a Model U97-Ultra-2.
Block Diagram
Specifications
Video Inputs:
PC outputs (VGA to UXGA)
Resolutions:
PC resolutions up to 1920x1280 @ 60 Hz
Video Levels:
0 to 0.7v p-p
Dimensions:
Sender (H x W x D) - 1.5 x 19 x 5.06 Receiver (H x W x D) - 1.75 x 14 x 4.06
Weight:
Sender - 4 Lbs Receiver - 3 Lbs
USB Support:
High Speed devices (12Mb/s) Low Speed devices (1.5Mb/s)
UTP Cable:
Up to 400 feet using any Cat5e or 450 ft using Cat6
Temperature:
Operating: 32 to 122 DegF (0 to 50 DegC); Storage: -40 to +185 DegF (-40 to +85 DegC)