HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Receiver)

HBX-R

Click for Larger Image


  
  • Fully Compliant with HDBaseT standard
  • Supports virtually all HDMI and DVI resolutions including 4K UHD
  • Extends, Video, Audio, RS-232, IR, and Ethernet
  • Supports extension to 100 m (330 ft)
  • Fully isolates grounds between TX and RX sides
  • Compact, Rugged, Reliable, and Economical

This product is a Class A HDBaseT compliant Receiver that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.

Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.

Receiver includes a universal 5v power supply. IR emitter and IR detector cables are included.

Note about Power Supply

When connected to HBX-S, the Receiver needs the power supply connected as shown above. However, certain Senders, such as the HSM-44-BX Matrix Switch provide Power-over-Cable on their HDBaseT outputs eliminating the need for connecting a power supply to the Receiver.


  • Fully Compliant with HDBaseT standard
  • Supports virtually all HDMI and DVI resolutions including 4K UHD
  • Extends, Video, Audio, RS-232, IR, and Ethernet
  • Supports extension to 100 m (330 ft)
  • Fully isolates grounds between TX and RX sides
  • Compact, Rugged, Reliable, and Economical
  • Plug and play, no configuration needed
  • Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
  • Video Standards:
    DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
    12 bit color depth, 3D video and 4K support)
  • Signal Type:
    TMDS
  • Resolutions:
    DVI signal - VGA (640x480) thru WUXGA (1920x1200)
    HDTV signal - 480i through 1080p
    Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m
  • Audio Formats:
    All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD
    Master Audio (32-192 kHz sample rate)
  • DDC:
    Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP
    handshake
  • CEC:
    Pass-Thru CEC for Consumer Electronics Control compatible devices
  • RS232:
    Bidirectional (full-duplex) any baud rate up to 115,200
  • Ethernet:
    100BaseT Ethernet LAN
  • IR:
    Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
  • Power Supply:
    100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
  • Power:
    Sender & Receiver: 10 watts maximum
  • Temp/humidity:
    Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
  • Cooling:
    Convection
  • Mounting:
    End plates with hole for surface mounting
  • Enclosure type:
    Metal (Aluminum ends, Aluminum Extrusion)
  • Dimensions:
    1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D)
    Depth excludes connectors
  • Product weight:
    Sender 9.3 oz (0.58 lb or 264 g)
    Receiver 10 oz (0.63 lb or 284 g)
    Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
  • Safety:
    CE
  • EMI/EMC:
    CE, FCC Class A
  • MTBF:
    90,000 hours (Calculated Estimate)
  • Warranty:
    3 years parts and labor