HDMI, Audio & USB Extension w/Programmable RS-232 I/O Controller Decora Wallplate

EX-HDU-WP

Larger Image

  
  • Supports HDMI, DVI & HDCP
  • RS-232 port for auxilary device control
  • Store separate commands for the auxilary device
  • Compact, Rugged, Reliable and Economical
  • SPDIF audio extraction (wallplate)

The Model EX-HDU is a HDMI, AUDIO and USB Extension consisting of an EX-HDU-WP transmitter wallplate and an EX-HDU-R receiver. These connect using standard CAT5e/6 UTP cabling up to 150 feet (50 Meters).

The front of the Model EX-HDU-WP wallplate has (1) HDMI input, (1) USB Host connection and (2) USB Hub connections. On the rear of the Model EX-HDU-WP wallplate has (1) Terminal strip with 12 vDC Power and SPDIF audio connections and an RJ45 connection to the Model EX-HDU-R.

The Model EX-HDU-R has (1) HDMI output, (1) 3.5mm line-level stereo audio output, (4) USB Hub connections, (1) 3.5mm IR output, (1) Terminal strip with RS-232 and (4) I/O connections, ETHERNET for internal webpage (if installed) and USB port for configuration.

The Model EX-HDU-R can control other devices via RS-232. Typically, a TV or video projector connected to the EX-HDU-R HDMI output connector. The EX-HDU-R has the ability to store user-defined commands for controlling devices by RS-232. Optionally, these commands are output based on receiving video or from changes on the I/O terminal strip.

In Auto Mode, the unit can send pre-programmed “ON” commands, when video is received at the HDMI input, and when no video is received, it will send the pre-programmed “OFF” commands after a predefined delay.

Normally the RS-232 terminals on the unit are acting as the “master” issuing commands to external devices, but the unit can also be controlled serially. See Section 5 of the Manual for details on the available commands.

Commands can also be triggered by webpage actions, telnet commands or I/O terminal strip changes. Use the USB port on the front panel to configure the device operation via a free Windows™ GUI

  • Supports HDMI, DVI & HDCP
  • RS-232 port for auxilary device control
  • Store separate commands for the auxilary device
  • Compact, Rugged, Reliable and Economical
  • SPDIF audio extraction (wallplate)
  • Video Standards:
    DVI (Single Link)
    HDMI 1.4
    HDCP 1.1
  • SIgnal Type:
    TMDS
  • Connectors:
    EX-HDU-WP
    (1) HDMI Input

    EX-HDU-R
    (1) HDMI Output
  • Resolutions:
    DVI - VGA (640x480) thru WUXGA (1920x1200)
    HDTV - 480p thru 1080p60
    (no interlaced support)
  • Audio Format:
    LPCM 2 Channel Audio (32-192kHz sample rate)
  • Power Supply:
    100 to 240 VAC, 47-63 Hz, External; 12VDC
  • Temperature/Humidity:
    Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
  • Cooling:
    Convection
  • Enclosure:
    Metal (Steel)
  • Dimensions:
    EX-HDU-WP - 2.60" H x 1.30" W x 1.80" D (66mm H x 33mm W x 46mm D)
    EX-HDU-R - 1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D)
    Depth includes mounting flanges
  • Weight:
    Model Only
    EX-HDU-WP - 0.75 lb
    EX-HDU-R - 1.20 lb
    Shipping
    EX-HDU-WP - 1.25 lb
    EX-HDU-R - 1.70 lb
    EX-HDU-WP + EX-HDU-R - 2.50 lb
  • Vibration:
    ISTA 1A in carton (International Safe Transit Association)
  • Safety:
    CE
  • EMI/EMC:
    CE, FCC Class A
  • MTBF:
    90,000 hours (Calculated Estimate)
  • Warranty:
    3 years parts and labor
Windows® PC Software
Additional Downloads