HDMI/DVI + VGA + Audio + RS-232 Over Fiber Extender Switcher

New Product

HR-733

Larger Image   360° View

  
  • Transmit HDMI, VGA+Audio, and RS-232 up to 1000m over multi-mode fiber
  • Converts and scales VGA or Component video and audio to HDMI
  • 3 selectable video inputs (2 HDMI/DVI and 1 VGA/YPbPr with Audio)
  • RS-232 pass-thru to remote & control of the input source selection and setup
  • Uses a single (simplex) low cost multi-mode SC fiber
  • Safety interlock does not turn on high power fiber LED drivers unless fiber-optic cable is plugged in at both ends

The HR-733 extends uncompressed HDMI video, VGA, audio, and bi-directional RS-232 up to 1000 m over just one multi-mode fiber optic cable. It accepts 2 HDMI or DVI inputs and 1 VGA or YPbPr with corresponding audio (via 3.5mm L/R stereo or S/PDIF TOSLINK). Analog input is converted to HDMI and automatically scaled to the native resolution of the remote display. The receiver simply connects to the display using an HDMI cable (DVI connection requires adapter cable). The unit is fully HDCP compliant and supports EDID pass-through from the remote display to the selected source. Virtually all PC and HDTV resolutions are supported.


The HR-733 also extends a bi-directional data channel (CEC, or RS-232 Serial) along with the video and audio. The RS-232 port can also be used to control the Sender (for input selection, baud-rate,  etc).


A user friendly front panel with high contrast alphanumeric LCD is used for easy setup and control of the system. Advanced features include: automatic scaling of the analog video input to match the native resolution of the remote display, diagnostic messages on the front panel LCD (e.g. RS-232 strings sent or received), audio delay of the analog input to correct lip-sync, support for CEC data channel of HDMI (choice of RS-232 or CEC extension), and 3D deep-color HDMI 1.4 support.



Watch this video to learn more about this Fiber-Optic Extender:

  • Transmit HDMI, VGA+Audio, and RS-232 up to 1000m over multi-mode fiber
  • Converts and scales VGA or Component video and audio to HDMI
  • 3 selectable video inputs (2 HDMI/DVI and 1 VGA/YPbPr with Audio)
  • RS-232 pass-thru to remote & control of the input source selection and setup
  • Uses a single (simplex) low cost multi-mode SC fiber
  • Safety interlock does not turn on high power fiber LED drivers unless fiber-optic cable is plugged in at both ends
  • Eco friendly design turns off parts of circuit when they are not in use
  • Front panel LCD display
  • HDCP Compliant and support for HDMI 1.4 3D deep color format
  • Video Inputs:
    2x HDMI or DVI, 1x HD15 (VGA or Component Video)
  • Supported Resolutions:
    PC from VGA to WUXGA, HDTV from 480i to 1080p
  • Audio Inputs:
    3.5mm stereo, S/PDIF (TOSLINK)
  • Optical Wavelength:
    780 nm to 980 nm
  • Optical Cable:
    Simplex (only 1 fiber) Multi-Mode. 50/125 um OM2 or OM3
  • Power:
    5V DC @ 2.6A
  • MTBF:
    90,000 hours
  • Operating Temp:
    32 to 122°F (0 to 50°C)
  • Storage Temp:
    -40 to +185°F (-40 to +85°C)
  • Enclosure:
    Steel and Aluminum
  • Dims    (HR-733-S):
    1.66" H x 8.2" W x 7.83” D
  • Weight (HR-733-S):
    2.73 lbs
  • Dims    (HR-733-R):
    1.25” H x 2.75” W x 4.28” D
  • Weight (HR-733-R):
    0.43 lbs
Brochures
Manuals
Similar Products or Accessories